TECHNICAL DATA SHEET
Product Name: ULX-110 Motor Oil SAE 15w40
Description: ULX-110 engine oils are a new concept in petroleum base oils. Advancement in the last few years of specialty additives such as detergency, EP, viscosity stabilizers, and improvers and friction modifiers are needed to meet the needs of today’s transportation vehicles. Ultra Lube, Inc. through advanced research and development by today’s lubrication specialists and many top professional race engine builders have formulated an oil that out performs all commercial petroleum and synthetic motor oils. Our emerald green colored oil far surpasses the requirements of all engine manufacturers to provide maximum protection and performance. Through advanced research and product development, this oil is formulated to provide maximum protection and performance that far surpasses the service requirements of all engine manufacturers, world wide, and adds years of trouble free performance to your engines, whether diesel, gasoline or alcohol. Our claim is backed with a guarantee.
Composition: Our premium high viscosity index base oils are blended with top of the line in each category of additives from three different lubricant additive specialists. The additive package adds to the excellence of this product by containing: oxidation inhibitors, detergent additives, rust inhibitors, zinc dithiophosphate, stabilizing agents, dispersant additives, corrosion inhibitors, pour point depressants, anti-wear additives, cleaning agents, anti-scuff additives, foam inhibitors, 2 friction modifiers, and organic molybdenum.
Performance Advantages: Increased horsepower by reducing friction up to 38%. Molybdenum coated parts protect at start up and during operation with accidental low oil operation. Increased oil pressure during severe service and continuous service operation. Reduced oil temperature by 20F, reduced oil consumption and increased MPG, increased compression and bearing life by 50 to 75%.
Uses: ULX-110 is recommended for use in all internal combustion engines including gasoline, diesel, alcohol, and natural gas engines, supercharged, turbocharged or naturally aspirated engines.
Performance Characteristics: This product is designed to insure optimum performance in a wide variety of mixed fleet equipment under the most adverse operating conditions. This includes but is not limited to the following:
· EO-M Plus Mack Truck Company approval of 40,000 miles oil service intervals.
· Meets MIL-L2104E (which supersedes MIL-2104D for heavy duty engines, MIL-L-45199B for supercharged diesels)
· Meets MIL-L46152D for gasoline and diesel engines
· Meets API service classifications CD CE CFIV CGIV CHIV CIIV CJIV SD SE SF SG SH SJ SL
· Exceeds the performance requirements of: Detroit Diesels, Detroit Diesel CD-II, Mack EO-J and EO-K/2, Caterpillar S-3, Caterpillar TO-2, Volvo B-20, MIL-L-46152D, MIL-L-2104E, and Ford, Chrysler, and I.H. requirements for Alkyl Zinc
· Exceeds ASTM Sequence Test IIC, IIIE and VE
CAUTION: Do not ingest. If this should occur, drink large volumes of water and seek medical attention. Avoid storage of product in freezing temperatures. Keep container sealed when not in use. Rinse empty container before discarding in an authorized landfill site. KEEP OUT OF REACH OF CHILDREN.
Typical Specifications: 15w/40
API Gravity: 30.0
Viscosity SUS @ 210F (98C): 80
Viscosity cSt @ 100C: 15.6
Viscosity Index: 144
Pour Point F: -20 (-6C)
Flash Point F: 375 (190C)
Total Base Number
(ASTM D-2986): 12
Sulphated Ash, WT%: 1.00
Specific Gravity: 0.8768